TEC-220 Collaring Machine

Collar sizes: 17–219,1 mm | 3/8”″– 8″ O.D.
Run tube sizes: 33,7–813 mm | 1″– 32″ O.D.
Pipe material: Steel, Stainless steel, Aluminium, Copper, Copper-Nickel
Machine type: Industrial machines
Process: Collaring

Most commonly used in:

Product material:

T-DRILL TEC-220 Brochure EN

TEC-220 Collaring Machine for mechanically formed T-outlets up to SCH 40 pipes

Please accept marketing-cookies to watch this video.

T-DRILL TEC-220 is a powerful Collaring machine for up to SCH 40 pipes. The TEC-220 forms mechanically extruded outlets directly on run pipes up to 813 mm (32”). The machine is suitable for branching all malleable materials (Steel, Stainless steel, Aluminium, Copper & Copper-Nickel). The entire process –from pilot hole milling to a complete, trimmed branch outlet up to Ø219,1 mm (8”) can be performed on a single workstation in three automatic work cycles.

Pilot hole milling and collaring are easily controlled by an operation panel along with automatic lubrication for each step of the process. The standard branch programs can be loaded from machine memory. The operator can also create custom collaring programs or modify them from the standard programs.

A balancer makes the milling unit (EC) very easy to handle. For increased safety, sensors verify the collaring head is correctly installed before starting the fully automatic collar extrusion. After the quick and accurate trimming process, the branch pipe can be connected to a formed outlet either by orbital or manual welding.

T-DRILL TEC-220 is an Industry 4.0 ready machine with many possibilities. The sturdy, ergonomically designed machine is equipped with many safety features that make the TEC-220 safe and easy to operate even in the heaviest applications. The delivery package also includes a convenient Tool Table.

Several accessories & options are available to customize and upgrade machine operation & tool handling:

  • Tube Measuring Table
  • Tube Railing System
  • Automatic Positioning System (APS)
  • Jib arm for easy tool handling – recommended with large tools
  • Laser pointer for accurate collar positioning
  • Special whole-body clamps when necessary
  • Angle measuring device when more than one branch in one run pipe, but measuring table is not needed
  • Heavy Duty collaring tools for thick wall (SCH 40) pipes
  • Ball pull option for extra small-, thick wall collars or e.g. with hygienic applications
  • Beveling device with typically 37° bevel for welding preparation with thick wall (SCH 40) pipes

The TEC-220 is an ideal solution for many industries:

  • Stainless Steel Enterprises – e.g. pumps, valves, food & dairy, water treatment, pharmaceutical & chemical industries
  • HVAC – e.g. heat exchangers, air pumps, radiators
  • Shipbuilding – e.g. air handling, clean & wastewater, ballast water, engine tubes
  • Any branching application utilizing malleable tube and pipe

Key Features:

  • Powerful machine: easily handles pipe up to SCH 40
  • Safety & Convenience: safe and easy to operate
  • Automatic work cycles increase efficiency
  • Standard branch programs can be loaded from machine memory
  • Precision collar quality
  • Accessories & options to customize and upgrade machine operation & tool handling
  • Easier welding (Butt weld outlet vs nozzle weld)
  • Suitable for all malleable materials (Steel, Stainless steel, Aluminium, Copper, CuNi)

 

COMPARISON: Welded Fittings vs T-DRILL Collaring & Flanging

Please accept marketing-cookies to watch this video.

CHECK OUT ALSO OUR NEW GUIDE:

CUT COSTS, IMPROVE EFFICIENCY, AND SAVE A MILLION PER YEAR WITH T-DRILL METHOD.

 

ONLINE CALCULATOR

Use the calculator to see how much you can save with T-DRILL method.

 

You might also need:

TEC-220 Collaring Machine

TEC-220Value
Branch tube
diameter
17–219,1 mm | 3/8”” – 8”
Run tube diameter33,7–813 mm | 1”– 32”
Pipe materialSteel, Stainless Steel, Aluminium, Copper, Copper-Nickel
Operating voltage400 V / 50 Hz, 3-phase
| Optionally 230 V / 50 Hz
Fuse sizesMax. 3 x 63A
Connected power5 kW
Air supply6–8 bar
Air consumption50 l/min
Noise levelMax. 85 dB
Machine dimension
(H x W x D)
1800 x 1250 x 1700 mm
Package dimension
(H x W x D)
w/o measuring table
1900 x 1350 x 2050 mm
Gross weight1500 kg

Note! The above values are intended as a guidance only.

Feel free to ask for more information:


    Address


    Country


    Business Sector

    HVAC


    HVACHeating, Air Conditioning, VentilationRefrigerationWater HeatingSolar Panels

    Automotive


    Engine CoolingExhaust (Exhaust Circulation, Muffler, sensors)Brake and FuelAir ConditioningPower Steering

    Shipbuilding


    Naval ShipyardCivilian and Cargo ShipyardRepair Shipyard

    Stainless Steel Enterprises


    Water Treatment Food, Dairy and BreweryPharmaceutical and Chemical IndustryLiquid Level and Flow MeasurementWater Pumps/Boosters, Circulation

    Plumbing and Mechanical Contractors


    Plumbing and Mechanical Contractors

    Other


    Position in the Company


    Department


    Message


    Upload a file

    approved By submitting this form, I accept privacy policy


    Share on social media

    Contact us