Additional Information
Chamfering: 21,3–219,1 mm | .840”–8.625” OD
Expansion: Copper: 60–219,1 mm | 2.375”–8.625” OD
Flanging: 21,3–219,1 mm | .840”–8.625” OD
Pipe diameters: 21,3–219 mm | .840”–8.625” OD
Material: Stainless Steel, Copper, Carbon Steel, Aluminum, CuNi
Machine type: Industrial machines
Process: End forming
Most commonly used in:
With the T-DRILL F-200 flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared with traditional weld neck flange connections.
F-200 meets the major requirements of the chemical and food-processing industries, and of shipbuilding and pipe fabrication in general.
COMPARISON: Welded Fittings vs T-DRILL Collaring & Flanging
| F-200 | Value |
|---|---|
| Mains supply | 200–240 V / 50 Hz /60 Hz, 3-phase 400–480 V / 50 Hz /60 Hz, 3-phase |
| Fuse | Min 3 x 50, Max 3 x 125 A (200–240 V) Min. 3 x 35, Max. 3 x 100 A (400–480 V) |
| Power supply | 10 kW |
| Air pressure | 6 bar (600 kPa) *) | 87 psi *) |
| Air consumption | 20 l/min *) |
| Oxygen | 2–5 bar (200–500 kPa *) | 29–72 psi * |
| Propane | Max. 2 bar * | 29 psi * |
| Hydraulic pressure | Max. 120 bar | 1740 psi |
| Flanging range | 21,3–219 mm | .840”–8.625” OD |
| Machine dimensions | 1 700 x 1 120 x 1 370 mm | 67'' x 44'' x 54'' (L x W x H) |
| Package dimensions | 1 700 x 1 120 x 1 370 mm | 67'' x 44'' x 54'' (L x W x H) |
| Net weight | 2,700 kg | 5,952 lbs. |
| Gross weight | 3,200 kg | 7,055 lbs. (in wooden case) |
| *) Required only with hot forming system | |
Note! Above values are intended as a guide only.
*) Required only with hot-forming system
Share on social media
